Recent Mold Remediation Posts

How to Stop Mold From Growing in the Bathroom

9/25/2019 (Permalink)

Mold growth on tiles of bathroom Mold growth in a Snoqualmie, WA bathroom

How To Stop Mold Growth

You know what happens when mold starts to grow. It doesn’t seem to stop. You want to take the offensive to prevent mold from growing, especially in your bathroom. Bathroom mildew and mold grows around pipes under the sink and corners around the bathtub. Leaky toilets are also prone to mold. You can find mold anywhere there is moisture. Preventing mold from occurring in your bathroom is a matter of keeping excessive moisture at bay. The following list will assist you in stopping mold growth.

1. There may be a humidity problem in your bathroom. Mold can begin to grow when the humidity level is at 55%. To combat this, keep it between 40 and 50. Some air-conditioners now have built-in de-humidifiers. If yours does not, you can buy them almost anywhere.

2. Always turn on the exhaust fan when taking a bath or shower. Allow the fan to continue to run for 30 minutes afterward. If you do not have an exhaust fan, open a window or keep the bathroom door open.

3. Get rid of the water. Mold and bathroom mildew love this. Clean up areas where water accumulates. When water splashes on the sink from washing your face or brushing your teeth, wipe it up. If you have a vanity, make sure to get the areas where there is caulking. Squeegee the tiles and glass after each time you shower. Wipe out the bathtub. Clean everything – bath, shower, sink, toilet – at least twice a week.

4. Toss the shower curtain in the washing machine if possible. Add the bathmats as well. These are all items bathroom mildew and mold can attach themselves to. After using your towels, don’t throw them on the floor and leave them there for a week. Put them in the washing machine along with the shower curtain and bathmats.
Stopping mold and mildew from growing in your bathroom will be an ongoing chore. A mold prevention specialist in Snoqualmie, WA, can give you more tips to keep the mold at bay.

Why Does Mold Have Such a Distinctive Odor?

7/29/2019 (Permalink)

Musty odor in your business?

Everybody has smelled mold; it’s literally everywhere, outside of specialized and tightly controlled environments. Normally, you can’t smell it; it takes millions of spores to become noticeable in most cases, and even then, it may not be a problem. However, once the smell becomes noticeable at a business in Mirrormount,WA, the mycotoxins that cause the scent have built up and you will need to address it.

What Are Mycotoxins?

Micro-fungi often have a complicated lifecycle, and different stages produce different byproducts. Broadly speaking, this is the substance that both creates the familiar moldy smell and can also be a problem for some individuals. Some molds actually produce “toxins” that are very helpful for humans, like penicillin. Anywhere that gets wet, especially repeat areas or places water isn’t supposed to be, can be the cause of a strong, musty odor, including

  • Drywall
  • Subflooring
  • Carpet
  • Ceiling tiles
  • HVAC units, condensers and ductwork

The odor associated with mold growth is unpleasant for most people, often being described as a rotting, fetid fragrance. Humans have a hard-wired connection between memory and smell, so customers, visitors and employees who smell it in your business may base their judgment about you on that scent.

What Can You Do About the Smell?

If normal cleaning doesn’t remove it, you may need a professional mold remediation company to perform an inspection and assess the problem. An investigation will usually find the cause – often an area that repeatedly gets wet ¬– and remove or contain the problem. They may use specialized air scrubbers, such as a commercial HEPA air filtration device, to reduce the mycotoxins and lower your spore count.

Remember: you can’t totally get rid of mold– it’s all about reducing the levels in air to a reasonable number. If the infection is severe, they may have to remove damaged items. The key is to not panic – once you call the pros in Mirrormount, WA, the problem is typically quite manageable, and even the most severe infection can usually be fixed. Once you get an inspection, you’ll have a better idea what’s causing the smell.

3 Key Areas Where Mold Loves To Grow

5/29/2019 (Permalink)

Mold relies on moisture to grow

Three Key Places Where Mold Can Be Found

Mold or mildew growth in your Fall City, WA, home is always going to be an unwelcome visitor, and the removal of more extensive mold damage should be handled by professionals. However, if you’re simply trying to determine where mold would choose to set up shop, there are certain areas of your home that should be considered first. Here are three key places where mold growth can potentially be found in your residence.

1. Areas With a Lot of Moisture

Fungi relies on moisture to grow, so inspecting areas such as bathrooms or kitchens that consistently see a build-up of moisture and high humidity is a great place to start. Check around your windows and door frames for any signs of leaks after a brutal winter of heavy storms, or any spots where your plumbing might have sprung a leak, as well.

2. Areas That Have Seen Serious Water Damage

While some leaks can be stopped in time to prevent a major disaster, others can’t be. Whether a pipe burst within your home’s walls or a flood ravaged your property, mold damage can start to accrue just as quickly as water damage. Building materials such as drywall, wood, wallpaper, carpeting, ceiling tiles or even your upholstered furnishings can soak up enough moisture to lead to mold growth. If you experience such an event, it’s vital that you contact experienced mold remediation technicians to carry out a thorough and proper removal.

3. Areas That Have a Lot of Outdoor Influence

Since mold spores can be airborne, it’s hard to ever truly eliminate the possibility of an outbreak. However, covering any exposed clothing, bags or shoes worn during an outdoor activity that can track in spores is helpful in stopping their spread, as well as regularly cleaning your vents and HVAC system to impede their transportation around your home.

Taking a Stand

When you’re looking to prevent or stop the spread of mold damage in your Fall City, WA, home, turn to these key areas first and contact professionals for help with any hazardous mold removal.